LANEY LIONHEART L20T-112 TUBE GUITAR AMPLIFIER COMBO, 20W 1x12" CELESTION G12H, CLASS A
|
|
|
|
|
LANEY LIONHEART L20T-112 TUBE GUITAR AMPLIFIER COMBO, 20W 1x12" CELESTION G12H, CLASS A
Parallel single ended
Designed and engineered with pride in Great Britain. The LIONHEART L20T-112 is a 20 watt Parallel, Single-Ended, Class 'A' all-tube combo, giving a great range of clean, crisp, dynamic and open guitar tones. With less emphasis on preamp distortion, the L20T-112 lets you hear more of you the player and your guitar and feel the power tubes clipping to breakup, giving a much richer harmonic content and a larger dynamic range than many other amps. Whatever your style, play through a LIONHEART and you’ll be amazed at how it reacts to your touch.
Class A
From a guitarist point of view, in a class A amplifier each of the amplifiers power tubes are working at maximum output the whole time. This makes them run ‘HOT’ and generates a very natural level of smooth tube compression.
Parallel Single Ended
Higher powers are obtainable by using multiple valves in parallel – in this case 4 x EL84’s are run in Single ended mode and then paralleled up to give 20 watts RMS of Parallel Single Ended tone
Celestion G12H 70th Anniversary driver
The G12H guitar speaker is hugely popular with players looking to recreate the classic sounds of 60s and 70s rock. With a strong, aggressive low-end and powerful low-mids, the G12H penetrates any mix with an attacking upper mid-range and an ice-cool top- end.
FX Loop
FX loops are important as they allow you to add effects to the signal path in a specific place between the pre-amp and the output section on an amplifier. This is where FX loops are important as it allows you to put time-based FX after the distorted pre-amp section. For example, delayed distortion sounds different to distorted delay – try it.
- Bright Switch
- Item dimensions: 463mm x 562mm x 253mm (HWD)
- Carton dimensions: 545mm x 630mm x 3325mm (HWD)
- Item weight: 24.50kg
- Twin channel
- 20 watts RMS
- Parallel single ended class A valve tone
- 1 x 12" Celestion G12H 70th anniversary
- Passive bass, middle and treble EQ
- Bite switch and global tone control
- 3 x 12AX7 + 4 x EL84
- High quality digital reverb
- Supplied with custom embroidered slip cover
- FS2-mini footswitch included
- Dimensions (H x W x D): 510 mm x 570 mm x 260 mm
- Net weight: 21.5 kg